Lietuviškai Rusiškai Rusiškai
Spausdinti

EP-Injisering

 

Gaminio techninė charakteristika

Injektavimo sistema epoksidinės dervos pagrindu

Barrikade®

 

 

 

 

AprašymasDESCRIPTION
Barrikade EP-Injection is a two-component solvent free epoxy system.

USES
Barrikade EP-Injection is recommended for repairing damages to concrete e.g. cracks, non-bond areas or precast elements.

PROPERTIES
Barrikade EP-Injection has a very low viscosity which provides excellent penetration, even for very small cracks.
The system will restore to a desireable degree the original monolithic nature of the concrete.

MIXING
Mix component A (epoxy resin), then add component B (hardener) and mix thouroughly. Mechanical mixing equipment is recommended.

APPLICATION
Barrikade EP-Injection is applied through an injection nipple using a gun or pump. (May not be necessary for larger damages).

CLEAN UP
Spills and equipment are cleaned with Barrikade Thinner, xylene, or other solvents.

HEALTH AND SAFETY PRECAUTIONS
See material safety data sheet.





BARRIKADE
TECHNICAL DATASHEET
DATE: 09-09-97


TECHNICAL SPECIFICATION:
Type: Two-component epoxy
Density: 1,12 g/cm³
Solids: 100 %
Viscosity: Approx. 200 cp @ 25°C
Colour: Clear, transparent

Slowly system:
Mixing ratio: A : B = 4,8 : 1 by weight
A : B = 3,5 : 1 by volume
Pot life:

Approx. 70 min. @ 20°C Pot life:

Approx.160 min. @20CTemperature:

Minimum 5°C on substrate.

Drying time: 8 - 10 hours @ 20°C
Curing time: 7 days @20°C
Storage: Minimum 2 years if
stored unopened @ 5 - 25°C
Pacaging: Sets of 1 and 10 kg


The products data, properties and recommendations are based on results of laboratory tests, field applications and practical experiences. Since we have no control over the application, we cannot be held responsible for the end result, unless any defects can be traced to the product.

Our liabilty is limited to the cost of the product.