Lietuviškai Rusiškai Rusiškai
Spausdinti

EW-70HG

Product data sheet

Epoxy paint
Barrikade®

 

Product Description

Barrikade EW-70 HG is a water dilutable, two-component pigmented epoxy paint for walls which provides an impervious, hard and repellant gloss finish with good chemical resistance. Low odour and non flammable.

 

Areas of use

Barrikade EW-70 HG is intended for use as a wallcoating, primarily on concrete and cementious renders subjected to chemical stress and with special requirements for cleaning and disinfection, e.g. hospitals, laboratories, pharmaceutical and food manufacturing.

 

Preparation

The surface should be free of laitance, oil, grease and loose or friable particles which may affect adhesion.

 

Mixing

Barrikade EW-70 HG is supplied in units ready to use comprising component A (Base) and component B (Hardener). First thoroughly stir contents in container B to a homogenous consistency. Pour contents of A into B container and mix thoroughly for several minutes with a low speeddrill. Use gloves and goggles. Keep the components at room temperature 24 hrs before use.

 

Application

Two coats of Barrikade EW-70 HG are recommended.

Material consumption: Approx.: 0,2 -

0,3 l/m² per coat.

 

Cleaning

Wash hands with special hand cleanser and thereafter with soap and water. Tools should be cleaned in luke warm water.

 

Health and safety

Mandatory and  ecommended industrial hygiene procedures should be followed whenever reactive resins are being handled and processed. See safety data sheet.

  

Technical data

Product:        Two-component water dilutable pigmented epoxy paint

Density:         1,31 g/cm³

Dry content:  70 % by weight

Viscosity:      Approx. 3500 CP, at 25°C

Colour:          See colour chart

Finish:            Gloss

Mixing ratio:  A : B = 1,07 : 1, by weight

white:            A : B = 0,62 : 1, by volume

Mixing ratio:  A : B = 1,14 : 1, by weight

pigmented:     A : B = 0,68 : 1, by volume

Potlife:          Approx. 60 min at 23°C

Application   The product should not be

temperature:  applied at temperatures

                      below 10°C.

Curing time:  Initial curing 8 hrs at 20°C.

                      Full cure 7 days.

Package:        10 l units

Storage/shelf life:      Store at 10 - 25°C in dry place and preferably in the original container. At least 12 months.

                                               

The technical data presented here, as well as our instructions and recommendations, are based on numerous tests and on our experience. They are intended to assist the user in finding the most suitable working method and Gaminio aprašymas